Fast, tidy fixes and compliant installs.
Plumbing Installations, Repairs & Maintenance in Zimbabwe
From burst pipes and leaking geysers to new bathrooms, kitchens, and water-saving upgrades — Core Construction’s qualified plumbers deliver reliable workmanship across Zimbabwe. We diagnose problems properly, work cleanly, and issue the right certificates so everything’s safe, compliant, and built to last.
Request a Quote
Expert Plumbing Solutions
Good plumbing should be invisible: strong water pressure, hot water on demand, quiet pipes, and drains that just work. When something goes wrong — a sudden leak, no hot water, a blocked drain — it can bring life to a halt and escalate quickly into water damage.
We handle both urgent repairs and planned installations, from fixing pinhole leaks and replacing mixers to complete bathroom/kitchen fit-outs and new water/heating systems.
We work across domestic and light-commercial properties and pay attention to the details that matter in Zimbabwe: correct geyser installation and drip trays, safe pressure control, anti-scald mixing, and durable materials that handle local water conditions.
If efficiency is your goal, we’ll help you choose low-flow taps and showers, dual-flush toilets, and smart hot-water solutions (high-recovery electric geysers, solar geysers, or heat pumps) that cut energy costs without sacrificing comfort.
Common Plumbing Problems We Solve
Leaks & burst pipes – ageing copper/PEX, poor joints, or pressure spikes.
Geyser failures – no hot water, thermostat/element faults, safety valve discharge, dripping trays.
Low water pressure – undersized piping, blocked aerators, faulty PRVs, municipal supply issues.
Blocked drains – kitchen grease, tree roots, collapsed pipes, or poor falls.
Toilet issues – constant running, weak flush, cistern inlet/flush valve failures.
Fixture wear & tear – dripping mixers, noisy pipes, failed seals and traps.
Our Approach to Plumbing (How We Work)
We start with a proper assessment — checking symptoms and the likely causes.
For leaks, that means pressure testing and tracing; for hot-water issues, testing elements, thermostats, and safety valves; for drainage, investigating with access points (and recommending camera inspections if we suspect collapse or intrusion).
The goal is to fix the root cause so you don’t see the same problem again in six months.
For installations, we specify fit-for-purpose materials and layouts: correct pipe sizing for pressure and flow, serviceable isolation points, and neat routing that avoids future clashes with cabinetry or electrical.
Geysers are installed with the right drip trays, safe discharge to outside, vacuum breakers, and pressure control to standard.
Wet areas (showers, baths, vanities) are coordinated with our waterproofing and tiling teams so the envelope is watertight before finishes go on.
Compliance is built in. Work is carried out in line with SANS 10252/10254 and, where required, a PIRB Certificate of Compliance (CoC) is issued on completion.
We keep sites tidy, protect finishes, and communicate clearly — what we found, the options, the costs, and how long it will take.
Before we leave, we test everything with you (flow, temperature, drainage, and visible joints) and share simple maintenance tips to keep things running smoothly.
Benefits of Professional Plumbing
Fewer repeat call-outs – root-cause fixes, not temporary patches.
Safety & compliance – installations to SANS standards with PIRB CoC where applicable.
Efficiency & comfort – reliable pressure, consistent hot water, and water-saving fixtures.
Protection from water damage – correct pressure control, drip trays, and shut-off points.
Neat, serviceable work – accessible valves, tidy routing, clear labelling.
Why Choose Core Construction
Qualified, experienced plumbers – domestic and light-commercial.
Standards-driven installs – SANS-aligned, PIRB CoCs issued where required.
Integrated trades – waterproofing, tiling, carpentry, and electrical coordinated in-house.
Transparent quotes & options – clear pricing with repair vs replace guidance.
Clean sites & reliable timelines – minimal disruption, tested before handover.
Frequently Asked Questions
My geyser is dripping — is it failing?
Not always. Safety valves discharge small amounts during heating, but continuous flow or water in the tray can signal a faulty valve, excessive pressure, or a failing thermostat/element. We test components, check pressure control, and confirm that the drip tray drains outside. If the geyser is near end-of-life, we’ll quote for a compliant replacement and discuss efficiency upgrades (e.g., heat pump/solar).
Why is my water pressure low in some taps but fine elsewhere?
Localised low pressure often comes from blocked aerators, partially closed isolation valves, or a failing mixer cartridge. Whole-house issues point to PRV problems, undersized/old pipework, or municipal supply fluctuations. We isolate the cause systematically and size any upgrades correctly so pressure is balanced without water hammer.
Can you fix blocked drains without digging up my yard?
In many cases, yes. We start with mechanical clearing and, if needed, recommend high-pressure jetting. If the blockage returns or we suspect collapsed pipes or root intrusion, a CCTV drain inspection confirms the issue so we can repair only the affected section and set proper falls.
Do you issue plumbing certificates?
Where required, yes — we issue a PIRB Certificate of Compliance for qualifying installations and alterations (e.g., geyser replacements, significant plumbing works). This documents that the work meets applicable standards and is useful for insurance and resale.
What does plumbing typically cost?
It depends on scope: small repairs (mixers, traps, minor leaks) are quick wins; geyser replacements, rerouting pipework, or drainage repairs are bigger tasks. After assessment, we’ll give a clear, itemised quote with options (repair vs replace, standard vs premium fixtures) so you can choose the best value for your situation.